China slab link fitting Manufacturers Factory Suppliers

The turnbuckle is also called turn buckle,which is a wire rope clamp used to bind and fasten steel wire rope.

The y type socket clevis is usually used for suspension strings and tension strings in line hardware.

Good electrical specification, strong mechanical strength,tensile bending intension of the e poxy glass fiber rod of internalload bearing is double than normal rolled products.

Foundation bolts can be divided into fixed anchor bolts, movable foundation bolts, expansion foundation bolts and adhesive foundation bolts, which also can be divided into l-type embedded bolts,

This type of ball clevis is mainly used to connect insulators and other electrical fittings, and can be installed with horns.

Link fittings are mainly used in power transmission line or substation,string assembly of insulators,connection of serial insulator chains,connection of wires and lightning clamps and connection of

The Hot-dip Galvanized Turnbuckle can adjust the tightness of steel rope by stretching out and drawing back the the leading screw.It can be used to binding components in component transition and

The clevis eye is usually used for suspension  strings and tension strings in line hardware.The socket clevis are made of casting steel, the security clips are made of bronze or stainless steel,

Ball hook are used to link clamps to insulator, or to link insulator and ground wire clamp to tower arms or subjection structure.

Breaking Load of D Anchor Shackle:70KN,120KN,160KN,210KN,250KN. The cotter pin of D Anchor Shackle is stainless steel,the other parts are hot-dip galvanized steel.

U type bolt only applicable for using on earthing wire and small section area conductors as a link fitting.The material is hot-dip galvanized steel,the security clip is stainless steel.

The yoke plate for power line is made of hot-dip galvanized steel.The single yoke plate can be made according to the requirements of customers including shape,sizes and so on.