China Protective Spacer Damper Manufacturers Factory Suppliers

Each of conductors for long-distance and big-capacity super high voltage transmission lines are adopted two, four and more split wires. So far 220KV and 330KV transmission lines are equipped with two

Square Frame Spacer Damper is used to ensure that the split wire harness inspection tool remains unchanged, and in the event of a short circuit, no electromagnetic force is generated between the wire

By installing Sextuple Spacer Damper, we can ensure that our communities can receive the necessary level of power without any negative impact. Accordingly, it is vital to use Spacer Dampers in

Square Frame Spacer Damper are installed on multi-bundle conductors to keep certain distance among each conductor so as to avoid impact and restrain wind vibration and sub-span oscillation.

Description: Spacer dampers were originally developed to suppress bundle conductor subspan oscillations that could cause damage to the multi-conductor bundle systems. Later, it was determined that

The triple spacer damper is mainly used for lines in areas where the wires are prone to vibration. Non-damped spacers have poor shock absorption properties, and can be applied to lines that are not

Spacer dampers are used to the fittings installed on the split wires to fix the spacing between the split wires to prevent the wires from whipping each other and suppress the breeze vibration and

The main purpose of spacers for splitting conductors in power transmission lines is to limit the relative motion between sub-conductors and to maintain the geometry of splitting conductors in normal

Two Split spacer dampers help to prevent electrical arcing. This occurs when two cables come into contact with each other and create a spark. If left unaddressed, arcing can cause serious damage to

Spacer Damper For Double Cable are essential components in electrical power lines that prevent the fatigue damage caused by vibration. These devices are installed in between the conductor and support

The main requirement for the Twin Split Spacer Damper is that the wire clamp must have sufficient grip strength and is not allowed to loosen during long-term operation.

The body of spacer damper,keepers and bracket are aluminium alloy,dampers are elastomer,the other parts are hot-dip galvanized steel.