China fitting splicing part Manufacturers Factory Suppliers

The insulated terminal is one of the power transmission line accessories to realize electrical connection.

Bimetallic Bolted Mid Span Joint is mainly used for splicing connections between insulated wires, aluminum stranded wires, aluminum alloy stranded wires, and steel-cored aluminum stranded wires at

-The Mechanical connectors can accommodate ACSR conductors over armor rod within the diameter range indicated-Application over armor rod-Used for all Combinations of copper, aluminum, ACSR, AAAC and

The C type connector belongs to the field of non-load-bearing connectors in the power network, and is particularly suitable for the connection of the branch wires of the main line and the sub-line in

Description: Insulation Piercing Connector is suitable for aluminum and copper conductors and componentsnot losable, end cap attached to body, Insulation material made of weather resistant glass

The Bolted Type C Connector is made of high strength alloy of elasticity with good electrical conductivity and according to different specifications of wires, it is designed with a specific shape of

This series insulation piercing clamp is mainly used for wire branching The applicable voltage is 10kV, 1kV and less more than 1kV.

Repair sleeves play an important role in maintaining the integrity of power transmission lines. These sleeves are used to repair a damaged section of a power line, preventing the need for costly and

The J type pg clamp belongs to shaped parallel groove clamp.The parallel groove clamp is used to connection of AAC or ACSR of small and medium-sized section and steel strand of overhead lightning

This type Compression Terminal Clamps for Double Wire are applicable to connect copper conductor with aluminum terminal of electric device, qualified for good electric contact performance suitable

The bimetallic Al-Cu parallel groove clamp is a widely used contact fitting to transfer electric load and parallel wires.The splicing of jumper wire for non-linear tower,branch

The Aluminium Compression Tap Connector is generally used in connection of jumper wires,branch lines,lead wires,service mains and other wires on the tower in overhead high-voltage and low-voltage