China ODM Bimetallic Cable Lug Manufacturers Factory Suppliers

The copper-aluminium bimetallic cable lugs are suitable for transition connection of the circular aluminium wires, hemicycle-sector aluminum wires, power supply cables in the distribution equipment

Bimetallic Bolted Mid Span Joint is mainly used for splicing connections between insulated wires, aluminum stranded wires, aluminum alloy stranded wires, and steel-cored aluminum stranded wires at

Hydraulic Jumper Connectors are used to bridge two electrical components in a circuit, thereby providing a continuous flow of current. They are designed to withstand high voltage and current loads,

Circuit Breaker Universal Clamp is mainly suitable for connecting wires to the incoming and outgoing terminals of electrical equipment (such as circuit breakers, isolating switches, fuses, load

Copper parallel groove clamp is used in the connecting of copper conductors.

JBTL series bimetal parallel groove clamp is suitable for unendurable force splicing and branch of the aerial wire. It has the function of protection and insulation when it matches insulating sheth.

Power accessories Bimetal parallel groove clamp,which is called PG clamp, is designed to connect two parallel bare conductors which can be aluminum alloy or aluminum steel reinforced.

The lightning protection piercing connector is a product with a new structure. It is mainly installed on the load side of the line insulator. It has the protective function of preventing 10KV

Our PG clamps are divided into: Aluminium PG clamp, Copper PG clamp, Bimetallic PG clamp. The parallel groove clamp is suitalbe for unendure force splicing and branch on the aerial wire, being used

The outer splicing of mid span joint is aluminium,the inner sleeve is hot-dip galvanized steel.

AS a splicing fitting,the parallel groove clamp for transmission power line is suitable for unending force splicing and branch on the aerial wire,being used with insulation cover.Its action is

Under the rated voltage,the splicing point temperature should not higher than the conductor temperature when through the max load electric current for long time.