China splicing tube Manufacturers Factory Suppliers

The Down Leading clamp is uswd to fix the cable to splice pole/tower and terminal pole/tower in the down-lead to the closure.

Our PG clamps are divided into: Aluminium PG clamp, Copper PG clamp, Bimetallic PG clamp.

The copper C clamp is normally used for connecting of copper wires.

The C type clamp is made of special aluminum alloy material, which has strong conductive property. It is suitable for both aluminum wire, copper wire and copper wire transition wire.

The Compression Type Jumper Connector is jumper connection accessory between two busbars in power transmission facility.

Earthing PG Clamp is suitable for grounding connections and high-voltage line discharge connections in overhead insulated lines of 20kV and below. Earthing PG Clamp is used in conjunction with the

The Bimetallic PG Clamp is applied for non-bearing connection of conduction and branch,which is usually used with insulating cover to play a role of insulating and protecting.

Copper-aluminium PG clamp is used for the Non-bearing connection and offset of aluminium stranded wire,copper core aluminium stranded wire,copper brand wire.

AS a splicing fitting,the parallel groove clamp for transmission power line is suitable for unending force splicing and branch on the aerial wire,being used with insulation cover.Its action is

Under the rated voltage,the splicing point temperature should not higher than the conductor temperature when through the max load electric current for long time.

The Aluminium Compression Tap Connector is generally used in connection of jumper wires,branch lines,lead wires,service mains and other wires on the tower in overhead high-voltage and low-voltage

H-type connectors are generally used in the crimp connection of jumpers, branch wires, lead wires, household wires, and house wires of overhead high-voltage and low-voltage power line towers.