China fitting for linking pipes Manufacturers Factory Suppliers

The hang clevis is used for the connectiong and combination of insulators, suspension clamps, strain clamps and protective fittings, to form a string set of suspension or strain fittings.

The yoke plate is used to connect insulator string and single conductor.

The twisted u shackle is one of the general power fittings used in overhead power transmission line.It is forged by hot-dip galvanized round steel,which can be single or series widely used.

The eyelet rigging thimble is mainly used together with preformed tension clamp to wrap steel strand or used as gasket for steel wire rope.

The Acring Horn Ball Link is used in high voltage transmission line. It can be installed with acring horns.

Link fittings are fittings used to connect insulators,suspension clamp,tension clamp and protective fitting to assemble suspension or tension set.

The Hot-dip Galvanized Turnbuckle can adjust the tightness of steel rope by stretching out and drawing back the the leading screw.It can be used to binding components in component transition and

Ball hook are used to link clamps to insulator, or to link insulator and ground wire clamp to tower arms or subjection structure.

The turnbuckle is one of the link fittings for power transmission line.it is hot-dip galvanized steel and composed of left and right hand thread adjustment rod,nut and pull rod,of which the

The Socket Clevis are malleable iron or casting steel,these purity clips are bronze or stainless steel,cotter pins are stainless,ferrous parts are hot-dip galvanize steel.

The special type includes the ball-eye and socket-clevis linking with insulator.The common type is usually pin connected type.They have differ-end grades according to the load and are exchangeable

The extension ring for overhead transmission power line belongs to one of the universal link fittings,which used for connection between insulator strings and fittings,clamps and insulator