China Bimetallic Al Cu Parallel Groove Clamp Manufacturers Factory Suppliers

The bimetallic Al-Cu parallel groove clamp is a widely used contact fitting to transfer electric load and parallel wires.The splicing of jumper wire for non-linear tower,branch

-The Mechanical connectors can accommodate ACSR conductors over armor rod within the diameter range indicated-Application over armor rod-Used for all Combinations of copper, aluminum, ACSR, AAAC and

Copper parallel groove clamps are contact fittings that connect wires in parallel to transfer electrical loads. They are widely used, such as jumpers for non-straight poles and towers, T-wiring at

The Bolted Type PG Clamp is suitalbe for unendure force splicing and branch on the aerial wire, being used with insulation cover.

Earthing PG Clamp is suitable for grounding connections and high-voltage line discharge connections in overhead insulated lines of 20kV and below. Earthing PG Clamp is used in conjunction with the

Guy Wire Parallel Groove Clamp is used for the fixation of steel strand terminals in power lines, the fixation of stay wire terminals, the fixation of diagonal stay wires, etc.

The PG clamp body and keepers are aluminium alloy, the other parts are hot-dip galvanized steel.

JBTL series bimetal parallel groove clamp is suitable for unendurable force splicing and branch of the aerial wire. It has the function of protection and insulation when it matches insulating sheth.

When the distribution overhead line is aluminum wire, and the lead wire is copper wire, it is Use a copper-aluminum parallel groove clamp, because the direct connection of copper-aluminum will cause

Power accessories Bimetal parallel groove clamp,which is called PG clamp, is designed to connect two parallel bare conductors which can be aluminum alloy or aluminum steel reinforced.

Our PG clamps are divided into: Aluminium PG clamp, Copper PG clamp, Bimetallic PG clamp. The parallel groove clamp is suitalbe for unendure force splicing and branch on the aerial wire, being used

Parallel Groove PG Clamp is used in the connecting of Aluminum cable, Steel cored Aluminum cable or overhead ground wire strand for small and medium-size section at the position of not under tension,