China bearing link fitting Manufacturers Factory Suppliers

As one of Link fitting, the extension Y clevis is used to link other fittings in tension strings.

Normally, the hinge clevis for power line is used as first fitting in overhead line strings. The first fitting used for the connection of overhead line hanging metal fittings and steel towers, also

Good electrical specification, strong mechanical strength,tensile bending intension of the e poxy glass fiber rod of internalload bearing is double than normal rolled products.

The turnbuckle is also called turn buckle,which is a wire rope clamp used to bind and fasten steel wire rope.

The socket tongue is made of hot-dip galvanized steel. Security clip is stainless steel, the cotter pin is stainless steel.

Link fitting is used in connection between insulator chain and pole tower,insulator chain and other power fittings and insulators,which bearing mechanical load and composed of specialized link

Link fitting is used in connection between insulator chain and pole tower,insulator chain and other power fittings and insulators,which bearing mechanical load and composed of specialized link

Galvanized Adjusting Link can adjust the length continuously according to actual engineering requirement, the adjusting range is big, the size can be adjusted accurately.

The U bolt, is also known as U-bolts,which is an nonstandard part and its sharp is U Type.The thread in the two ends can be combined with nut.It is called U bolt for the way of fixing item like a man

The extension chain links are used at dead ends and corner structures to set the insulator string out from the pole or crossarm to provide more climbing space.

The cotter pin is stainless steel, the other parts are hot-dip galvanized steel.

As the important connecting fitting in the power grid construction,the Socket Eye for power line is mainly used to connect the suspension clamp and the insulator string,and cooperate with other