China Aluminium Alloy Octagonal Spacer Damper Manufacturers Factory Suppliers

The Aluminium Hexagon Spacer Damper is mainly used to limit the relative motion between the conductors and to maintain the geometry of the spliting conductors under normal operation.For long

The body of Two Bundles Spacer Damper, keepers and bracket are aluminium alloy, dampers are elastomer, the other parts are hot-dip galvanized steel.

Four Bundle Spacer dampers are an essential component in power transmission lines. They are used to manage the behavior of power lines in windy conditions and maintain their stability. Spacer dampers

The body of Square Spacer Damper, keepers and bracket are aluminium alloy, dampers are elastomer, the other parts are hot-dip galvanized steel.

By installing Sextuple Spacer Damper, we can ensure that our communities can receive the necessary level of power without any negative impact. Accordingly, it is vital to use Spacer Dampers in

Square Frame Spacer Damper are installed on multi-bundle conductors to keep certain distance among each conductor so as to avoid impact and restrain wind vibration and sub-span oscillation.

Description: Spacer dampers were originally developed to suppress bundle conductor subspan oscillations that could cause damage to the multi-conductor bundle systems. Later, it was determined that

Each of conductors for long-distance and big-capacity super high voltage transmission lines are adopted two, four and more split wires. So far 220KV and 330KV transmission lines are equipped with two

The triple spacer damper is mainly used for lines in areas where the wires are prone to vibration. Non-damped spacers have poor shock absorption properties, and can be applied to lines that are not

The Multiphase Spacer Damper shall be made of track-resistant high-density polyethylene which suitable for using in the tropical climatic area and have passed electrical and mechanical test according

Two Split spacer dampers help to prevent electrical arcing. This occurs when two cables come into contact with each other and create a spark. If left unaddressed, arcing can cause serious damage to

The main requirement for the Twin Split Spacer Damper is that the wire clamp must have sufficient grip strength and is not allowed to loosen during long-term operation.