China adjustable tension range clamp Manufacturers Factory Suppliers

The series of wedge strain clamp are mainly used in the voltage rating of 1KV and below power insulated line.

The tension clamp of NLL series are generally called bolted type tension clamp or aluminium alloy gun type strain clamp,which are used for fixing aluminium wire or steel core aluminium wire on the

The tension clamp is suitable for aerial line up to 220kV, fixing aluminium wire or steel core aluminium wire on the strain pole.

Tension clamp refers to the hardware used to fix the wire to bear the tension of the wire and hang the wire to the tension string or tower.

A type of wire clamp, which is widely used to support telephone drop wire at span clamps, drive hooks and various drop attachments.

The body of Sigle U Bolt Strain Clamp is made of high-strength aluminum alloy. It is normally used for 10mm2-50mm2 ACSR conductor.

The tension clamp is a power fitting fixing conductor to bearing the conductor tension and hanging the conductor with tension set or pole tower.This type is parallel tension clamp.

The body and keepers of aluminium bolted type tension clamp are malleable iron,cotter-pins are stainless steel and the other parts are steel.All ferrous parts are hot-dip galvanized.

The cotter pin of the wedge type strain clamp is stainless steel and the other parts are steel.All ferrous parts are hot-dip galvanized.

The wedge strain clamp body and wedge are malleable iron or steel according to required breaking load. All ferrous parts are hot-dip galvanized and steel except the stainless steel cotter-pin.

The compression strain clamp is used to fix and connect conductor onto the tension insulator string or the fittings on pole and tower through sustaining tensile force generated by the conductor.

The compression dead end clamp is used to fix and connect conductor onto the tension insulator string or the fittings on pole and tower through sustaining tensile force generated by the conductor.