China threshold link fitting Manufacturers Factory Suppliers

Link fittings are generally used in overhead electrical line or substation,by which the wires or lightning wires tension clamp and insulators are linked,the lightning wire clamps and pole tower are

The parallel clevis can change the length of assembly parts through connecting single-layer clevis withsingle-layer clevis or connecting single-layer clevis with double-layer clevis.

The clevis&togue steel plate pole cable fitting U clevis tongue is made of Hot-dip galvanized steel. It is used with bands in pole installations and with screws in wall installations.

The turnbuckle is hot-dip galvanized steel and composed of left and right hand thread adjustment rod,nut and pull rod,of which the anti-theft and locking device consist of anti-theft and locking bolt

The surface of the guy attachment should be hot dip galvanized, and the surface should be smooth and not be missed plating, zinc particles, bubbles, cracks and other defects, galvanized layer in

Link fitting are used to link clamps to insulator, or to link insulator and ground wire clamp to tower arms or subjection structure. Link fitting have special type and common type in accordance with

The socket eye for overhead transmission power line is malleable iron, hot-dip galvnized and the ecurity clip is stainless steel.

The turnbuckle is also called turn buckle,which is a wire rope clamp used to bind and fasten steel wire rope.

The Hot-dip Galvanized Turnbuckle can adjust the tightness of steel rope by stretching out and drawing back the the leading screw.It can be used to binding components in component transition and

It is mainly used to connect the preformed rod tension clamp with other linking fittings.

The Ball Clevis is made of hot-dip galvainzed steel. The sizes can be designed according to requirements.

The socket eye for overhead transmission power line is malleable iron, hot-dip galvanized and the ecurity clip is stainless steel.