China straight link fitting Manufacturers Factory Suppliers

The eye nut is mainly used in lock steel wire,steel tube and other types mechanical combination

The y type socket clevis is usually used for suspension strings and tension strings in line hardware.

The Thimble Clevis is used to connect the preformed helical tension clamp and other link fittings together, so that the whole string is connected to the pole.

The lifting hook is the most common type of spreader in hoisting machinery. The lifting hook is often suspended on the wire rope of the hoisting mechanism by means of pulley blocks and other

The socket eye for overhead transmission power line is malleable iron, hot-dip galvnized and the ecurity clip is stainless steel.

The cotter pin of hanging clevis is stainless steel, the other parts are hot-dip galvanized steel.

The rounded U shaped design of anchor shackles allows them to take loads from many directions without developing significant side load. The screw pin allows for easy attachment and detachment with a

Ball Y-clevises are used to attach ball and socket insulators to other associated hardware. The bent bolt in the Y-clevis section provides an additional point of articulation.

The Ball Clevis is made of hot-dip galvainzed steel. The sizes can be designed according to requirements.

The socket clevis for Arcing Horn are made of casting steel,the security clips are made of bronze or stainless steel,cotter pins are made of stainless less.All ferrous parts are hot-dip galvanized.

U type bolt only applicable for using on earthing wire and small section area conductors as a link fitting.The material is hot-dip galvanized steel,the security clip is stainless steel.

The Ball Tongue Clevis for overhead transmission power line is made of hot-dip galvanized steel.The sizes can be designed according to requirements.