China splicing device Manufacturers Factory Suppliers

Watertight mould for tapping services or mains with insulation piercing (FT) with 1 or 2 taps.This mould is to be used with our simultaneous tightening connectors type TTD as can use for separate tap

The Compression Repair Sleeve is used to renovate the harmed conductor as connection fitting of resuming the latter's electric & mechanical performance.

The Bolted Type C Connector is made of high strength alloy of elasticity with good electrical conductivity and according to different specifications of wires, it is designed with a specific shape of

The PG clamp body and keepers are aluminium alloy, the other parts are hot-dip galvanized steel.

Down lead clamp is used to lead cable down from the tower or pole in order to protect the cable from wear with tower or pole.Down lead is mainly used for ADSS and OPGW fixture in tower on cable fixed

The insulated piercing clamp is composed of reinforced shell,piercing blade,sealed plate,waterproof silicone grease, high strength bolt, torque nut and cable terminal cap cover.

The J type pg clamp belongs to shaped parallel groove clamp.The parallel groove clamp is used to connection of AAC or ACSR of small and medium-sized section and steel strand of overhead lightning

Insulation piercing connector is mainly suitable for the connection of the overhead insulation conductor, branch connection and grounding protection, It is used for the voltage which is 20KV, 10KV

Under the rated voltage,the splicing point temperature should not higher than the conductor temperature when through the max load electric current for long time.

The bimetallic parallel goroove clamps are designed to connect aluminumconductors and copper condcutors.Advanced forging technology enhances the mechanical strength of the clamp.

The Aluminium Compression Tap Connector is generally used in connection of jumper wires,branch lines,lead wires,service mains and other wires on the tower in overhead high-voltage and low-voltage

H-type connectors are generally used in the crimp connection of jumpers, branch wires, lead wires, household wires, and house wires of overhead high-voltage and low-voltage power line towers.