China robust tension clamp Manufacturers Factory Suppliers

The Backup Clamp is suitable for aerial line up to 220kV, fixing aluminium wire or steel core aluminium wire on the strain pole.

Tension clamp refers to the hardware used to fix the wire to bear the tension of the wire and hang the wire to the tension string or tower.

This series of Wedge Tension Clamp has the advantages of convenient use, good energy saving effect, small damage to the wire, reasonable structure and stable performance.

The tension clamp or drop wire clamp is used for the attachment of external connection cables of 1 pair of conductors in parallel, 0.9 mm in diameter, for use in the customer network.

The strain clamp body and keepers are malleable iron, the cotter-pin is stainless steel, the other parts are hot-DIP galvanized steel. This type strain clamp is customized for exporting.

The body of Sigle U Bolt Strain Clamp is made of high-strength aluminum alloy. It is normally used for 10mm2-50mm2 ACSR conductor.

The Metal Dead End Clamp is designed for service line with 2 or 4 conductors.These Dead End Clamps are easy to install without tools and suitable for various climatic conditions.

THA anchoring clamp is used to fix 2 or 4 core typically between the pole and the fascia board. The unique design of plastic clamp enables the cable direction to be a 90 degree opposite configuration

This Strain Clamp is usually used in low-voltage lines, has good conductive wire performance, and is easy to install. The minimum tensile strength is not less than 40KN.

This new type tension clamp is composed of wedge-shaped holder and wedge-shaped clamp fit the shape of the inner hole in the holder set in the clamp body and lining sleeve.

The wedge clamping mechanism directly hold the insulated wire without peeling wire insulation layer when installing.

The cotter pin of the wedge type strain clamp is stainless steel and the other parts are steel.All ferrous parts are hot-dip galvanized.