China minimum tension clamp Manufacturers Factory Suppliers

It is a kind of overhead power accessories and it's used to terminate 4-core of aerial bundle conductor. Its function is fixing and tightening the insulation conductor. The advantage of it is easy

The tension clamp of NLL series are generally called bolted type tension clamp or aluminium alloy gun type strain clamp,which are used for fixing aluminium wire or steel core aluminium wire on the

The Backup Clamp is suitable for aerial line up to 220kV, fixing aluminium wire or steel core aluminium wire on the strain pole.

This series of Wedge dead end Clamp has the advantages of convenient use, good energy saving effect, small damage to the wire, reasonable structure and stable performance.

The strain clamp body and keepers are malleable iron, the cotter-pin is stainless steel, the other parts are hot-DIP galvanized steel. This type strain clamp is customized for exporting.

The Anchoring Clamp for Round Cable are designed to anchor LV-ABC lines with insulated neutral messenger. The clamp consists of an aluminum alloy open body with two self-adjusting insulating plastic

THA anchoring clamp is used to fix 2 or 4 core typically between the pole and the fascia board. The unique design of plastic clamp enables the cable direction to be a 90 degree opposite configuration

These Anchor Tension Clamps are made of one opened conical fibre glass reinforced body, a pair of plastic wedges and a flexible bail. Different sizes offer a wide range of gripping capacities and

This Strain Clamp is usually used in low-voltage lines, has good conductive wire performance, and is easy to install. The minimum tensile strength is not less than 40KN.

The wedge type tension clamp is mainly composed of clamp body,thread clamp piece and rod.The conductor is placed in the clamp body wrapped by thread clamp piece.The clamp body tightly hold the

The body and keepers of aluminium bolted type tension clamp are malleable iron,cotter-pins are stainless steel and the other parts are steel.All ferrous parts are hot-dip galvanized.

The clamp is composed of a body, wedges and removable and adjustable bail or pad.