China Counter Weight Piece for export Manufacturers Factory Suppliers

The counter weight is one of protecting fittings which is used in the circumstance of insufficient distance of suspension insulators chain in straight line pole or between jumper connectors in

Square Frame Spacer Damper are installed on multi-bundle conductors to keep certain distance among each conductor so as to avoid impact and restrain wind vibration and sub-span oscillation.

spacer damper is needed to be installed on the interval among different spans. Moreover, the installation of spacer damper will be also helpful to remove the swing on span and aero vibration.

The high strength ground wire clamp is used for joining copper bond threaded earth rods together.

The Cable Fixing Clamp is used to fix high-voltage cables to prevent the cables from falling and causing personal injury.

The counter weight is used on overhead transmission lines and is a kind of electric power fittings. Its main function is to prevent the wires from swinging from side to side after being blown by

The triple spacer damper is mainly used for lines in areas where the wires are prone to vibration. Non-damped spacers have poor shock absorption properties, and can be applied to lines that are not

Spacer dampers are used to the fittings installed on the split wires to fix the spacing between the split wires to prevent the wires from whipping each other and suppress the breeze vibration and

The protective fitting is used as itself or matching with other various types electric installation,which plays a role of protection for electrical performance or mechanical performance.Moreover,It

Down lead clamp is used in electric power pole and tower for fixing optical cables and routing.It is used in fixing OPGW optical cable or ADSS optical cable on the tower. It is suitable for cables

The main requirement for the Twin Split Spacer Damper is that the wire clamp must have sufficient grip strength and is not allowed to loosen during long-term operation.

The Aluminium Hexagon Spacer Damper is mainly used to limit the relative motion between the conductors and to maintain the geometry of the spliting conductors under normal operation.For long