China average tension clamp Manufacturers Factory Suppliers

The series of wedge strain clamp are mainly used in the voltage rating of 1KV and below power insulated line.

The tension clamp of NLL series are generally called bolted type tension clamp or aluminium alloy gun type strain clamp,which are used for fixing aluminium wire or steel core aluminium wire on the

Tension clamp refers to the hardware used to fix the wire to bear the tension of the wire and hang the wire to the tension string or tower.

The Gun Type Strain Clamp body and keepers are malleable iron, the cotter-pin is stainless steel, the other parts are hot-DIP galvanized steel. This type tension clamp is customized for exporting.

The anchoring clamps are desgined for service line with 2 or 4 conductors.

The strain clamp body and keepers are malleable iron, the cotter-pin is stainless steel, the other parts are hot-DIP galvanized steel. This type strain clamp is customized for exporting.

The body of Sigle U Bolt Strain Clamp is made of high-strength aluminum alloy. It is normally used for 10mm2-50mm2 ACSR conductor.

The Self-locking Dead End Clamp is a fitting used to fix conductor to bear the conductor tensile force and hing the conductor to tension clamp set or pole to tower.It can be divided into two types

which are insulating protective fittings to fix aluminum wire or steel core aluminum wire on the strain pole and used in aerial insulation aluminum conductor and insulation aluminum cover.

The wedges make it clamped.Special fibre glass reinforced plastic and aluminum alloy body could resist weather.

The wedge strain clamp body and wedge are malleable iron or steel according to required breaking load. All ferrous parts are hot-dip galvanized and steel except the stainless steel cotter-pin.

The compression dead end clamp is used to fix and connect conductor onto the tension insulator string or the fittings on pole and tower through sustaining tensile force generated by the conductor.