China Aluminium Alloy Bolted Type Tension Clamp Manufacturers Factory Suppliers

The tension clamp of NLL series are generally called bolted type tension clamp or aluminium alloy gun type strain clamp,which are used for fixing aluminium wire or steel core aluminium wire on the

Tension clamp refers to the hardware used to fix the wire to bear the tension of the wire and hang the wire to the tension string or tower.

The Gun Type Strain Clamp body and keepers are malleable iron, the cotter-pin is stainless steel, the other parts are hot-DIP galvanized steel. This type tension clamp is customized for exporting.

The side opening dead end clamp is an outstanding device that provides a revolutionary solution for electrical connections. The side opening dead end clamp offers many advantages over traditional

Side Open Tension Clamps are live line tools compatible for distribution tap connections.Bronze Alloy and Aluminum Alloy castings offer high strength, corrosion resistance, and conductor

The bolt quantity of the tension clamp can be changed according to the customer's requirements.The clamp body and keepers are aluminum alloy, the cotter-pin is stainless steel, the other parts are

This Strain Clamp is usually used in low-voltage lines, has good conductive wire performance, and is easy to install. The minimum tensile strength is not less than 40KN.

The Self-locking Dead End Clamp is a fitting used to fix conductor to bear the conductor tensile force and hing the conductor to tension clamp set or pole to tower.It can be divided into two types

The tension clamp is a power fitting fixing conductor to bearing the conductor tension and hanging the conductor with tension set or pole tower.This type is parallel tension clamp.

which are insulating protective fittings to fix aluminum wire or steel core aluminum wire on the strain pole and used in aerial insulation aluminum conductor and insulation aluminum cover.

The bolt quantity of dead end clamp can be adjusted by your requirements.The body and keepers of the dead end clamp are aluminum alloy, the cotter-pin is stainless steel and the other parts are

The body and keepers of aluminium bolted type tension clamp are malleable iron,cotter-pins are stainless steel and the other parts are steel.All ferrous parts are hot-dip galvanized.